製品説明
製品説明
Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)ウォームホイール：耐摩耗性スズ合金 CuSn10-1
詳細写真
Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
Exploded View:
製品パラメータ
| 旧型 |
新モデル | 比率 | 中心距離 | 力 | 入力直径 | 出力径 | 出力トルク | 重さ |
| RV571 | 7.5~100 | 25mm | 0.06kW～0.12kW | Φ9 | Φ11 | 21N.m | 0.7kg | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06kW～0.25kW | Φ9(Φ11) | Φ14 | 北緯45度 | 1.2kg |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09kW～0.55kW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kg |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12kW～1.5kW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kg |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18kW～2.2kW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kg |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25kW～4.0kW | Φ14(Φ19、Φ24、Φ28) | Φ28(Φ35) | 410N.m | 9.0kg |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37kW～4.0kW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kg |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55kW～7.5kW | Φ19(Φ24、Φ28、Φ38) | Φ42 | 1050N.m | 35.0kg |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75kW～7.5kW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kg |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2kW～15kW | Φ28(Φ38,Φ42) | Φ50 | 84.0kg |
GMRV外形寸法：
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | 私 | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
会社概要
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
ロジスティクス
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
よくある質問
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6. 質問：何か資格をお持ちですか？
A：はい、CE認証とSGS認証レポートを取得しています。
連絡先：
リンゲル・パンさん
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| 応用： | 自動車、機械、船舶、農業機械、産業 |
|---|---|
| 関数： | 配電電力、駆動トルクの変更、速度変更、減速 |
| レイアウト: | 直角 |
| 硬度： | 硬化した歯面 |
| インストール: | 横型 |
| ステップ： | ダブルステップ |
| サンプル： |
US$ 12/Piece
1個（最小注文数） | |
|---|
| カスタマイズ: |
利用可能
| カスタマイズされたリクエスト |
|---|
What are the advantages and disadvantages of using a worm gear?
A worm gear offers several advantages and disadvantages that should be considered when selecting it for a specific application. Here’s a detailed explanation of the advantages and disadvantages of using a worm gear:
Advantages of using a worm gear:
- 高い減速比： Worm gears are known for their high gear reduction ratios, which allow for significant speed reduction and torque multiplication. This makes them suitable for applications that require precise motion control and high torque output.
- Compact design: Worm gears have a compact design, making them space-efficient and suitable for applications where size is a constraint. The worm gear’s compactness allows for easy integration into machinery and equipment with limited space.
- セルフロック機能： One of the key advantages of a worm gear is its self-locking property. The angle of the worm thread prevents the reverse rotation of the output shaft, eliminating the need for additional braking mechanisms. This self-locking feature is beneficial for maintaining position and preventing backdriving in applications where holding the load in place is important.
- Quiet operation: Worm gears typically operate with reduced noise levels compared to other gear types. The sliding action between the worm and the worm wheel teeth results in smoother and quieter operation, making them suitable for applications where noise reduction is desired.
- 高い衝撃荷重耐性： Worm gears have good shock-load resistance due to the sliding contact between the worm and the worm wheel teeth. This makes them suitable for applications that involve sudden or intermittent loads, such as lifting and hoisting equipment.
- Easy installation and maintenance: Worm gears are relatively easy to install and maintain. They often come as a compact unit, requiring minimal assembly. Lubrication maintenance is crucial for optimal performance and longevity, but it is typically straightforward and accessible.
Disadvantages of using a worm gear:
- Lower efficiency: Worm gears tend to have lower mechanical efficiency compared to some other gear types. The sliding action between the worm and the worm wheel teeth generates higher frictional losses, resulting in reduced efficiency. However, efficiency can be improved through careful design, quality manufacturing, and proper lubrication.
- Limited speed capability: Worm gears are not suitable for high-speed applications due to their sliding contact and the potential for heat generation. High speeds can lead to increased friction, wear, and reduced efficiency. However, they excel in low to moderate speed applications where high torque output is required.
- Heat generation: The sliding action between the worm and the worm wheel generates friction, which can result in heat generation. In high-load or continuous-duty applications, this heat buildup can affect the efficiency and longevity of the system. Proper lubrication and heat dissipation measures are necessary to mitigate this issue.
- Less suitable for bidirectional motion: While worm gears offer excellent self-locking capabilities in one direction, they are less efficient and less suitable for bidirectional motion. Reversing the direction of the input or output shaft can lead to increased friction, reduced efficiency, and potential damage to the gear system.
- Lower accuracy in positioning: Worm gears may have lower accuracy in positioning compared to some other gear types, such as precision gear systems. The sliding contact and inherent backlash in worm gears can introduce some degree of positioning error. However, for many applications, the accuracy provided by worm gears is sufficient.
- Potential for wear and backlash: Over time, the sliding action in worm gears can lead to wear and the development of backlash, which is the play or clearance between the worm and the worm wheel teeth. Regular inspection, maintenance, and proper lubrication are necessary to minimize wear and reduce backlash.
When considering the use of a worm gear, it’s essential to evaluate the specific requirements of the application and weigh the advantages against the disadvantages. Factors such as torque requirements, speed limitations, positional stability, space constraints, and overall system efficiency should be taken into account to determine if a worm gear is the right choice.
ウォームギアは重機や重設備に使用できますか？
はい、ウォームギアは重機や重設備に使用できます。以下に、そのような用途への適合性について詳しく説明します。
1. 高トルク伝達： ウォームギアの大きな利点の1つは、高トルクを伝達できることです。ウォームとウォームホイールの独特な設計により、効率的なトルク発生と動力伝達が可能になります。そのため、ウォームギアは、大きな回転力を伝達する必要のある重負荷用途に最適です。
2. コンパクトサイズ： ウォームギアは、重機向けにコンパクトで省スペースなソリューションを提供します。そのコンパクトな設計により、比較的小さなパッケージで高トルクを伝達できます。これは、スペースの制約がある場合や、コンパクトな設計が求められる用途において特に有利です。
3. 自動ロック機能： ウォームギアは自己ロック特性を備えており、ウォームがギアシステムの逆回転を防ぐことができます。この機能は、固定位置を維持したり、負荷がかかった状態でシステムが逆転するのを防ぐことが不可欠な重機において特に有効です。ウォームギアの自己ロック機能は、様々な重負荷用途において安定性と安全性を確保します。
4. 高いギア比： ウォームギアは高い減速比を実現できるため、精密な減速が求められる重機において有利です。高い減速比により回転速度とトルク出力を細かく制御できるため、重負荷や過酷な運転条件にも対応できるギアシステムを構築できます。
5. 耐久性のある構造： ウォームギアは通常、合金鋼、鋳鉄、青銅などの頑丈な材料を使用して製造されます。これらの材料は優れた強度、耐摩耗性、耐久性を備えているため、ウォームギアは重機で発生する重荷重や過酷な運転環境にも耐えることができます。
6. 過負荷保護: ウォームギアの独自の設計により、過負荷保護機能が備わっている。負荷がギアの許容容量を超えると、ウォームとウォームホイール間の滑り運動によって高い摩擦力が発生し、トルク伝達が制限され、ギアシステムの損傷を防ぐ。この過負荷保護機能は、急激な負荷増加や予期せぬ過負荷が発生する可能性のある重機において特に有効である。
7. 幅広い用途： ウォームギアは、さまざまな産業分野の重機や設備に幅広く使用されています。例えば、クレーン、ウインチ、エレベーター、鉱山機械、建設機械、圧延機、大型コンベア、船舶推進システムなどが挙げられます。ウォームギアの汎用性の高さは、幅広い重負荷用途に適している理由です。
ウォームギアは重機にとって多くの利点をもたらしますが、留意すべき点もいくつかあります。これには、摩擦と摩耗を最小限に抑えるための適切な潤滑、発熱を管理するための十分な冷却、効率的な動力伝達を確保するための適切なアライメント、そして摩耗や損傷の兆候を点検するための定期的なメンテナンスが含まれます。これらの要素に対処することで、ウォームギアは重機や設備の要求に確実かつ効果的に応えることができます。
How do you install a worm gear system?
Installing a worm gear system requires careful attention to ensure proper alignment, lubrication, and secure mounting. Here are the general steps involved in installing a worm gear system:
- Prepare the components: Before installation, ensure that all the components of the worm gear system, including the worm, worm wheel, bearings, and housing, are clean and free from any contaminants or damage. Inspect the components for any signs of wear or defects.
- Check alignment: Verify that the mating surfaces of the worm and worm wheel are clean and free from any debris. Ensure that the gear teeth mesh properly and that there is no excessive backlash or misalignment. Make any necessary adjustments or repairs before proceeding with the installation.
- Apply lubrication: Lubricate the worm gear system according to the manufacturer’s recommendations. Select a suitable lubricant that provides sufficient lubrication and reduces friction between the worm and worm wheel during operation. Apply the lubricant evenly to the gear teeth and other contact surfaces.
- Mounting: Position the worm gear system in the desired location, taking into account any space constraints or mounting requirements. Use appropriate fasteners, such as bolts or screws, to securely attach the system to the surrounding structure or base. Ensure that the mounting surfaces are clean, flat, and able to withstand the forces and loads exerted by the gear system.
- Alignment and adjustment: Once the worm gear system is mounted, check the alignment again and make any necessary adjustments. Ensure that the worm and worm wheel are properly engaged and that there is no excessive play or binding. Pay attention to any specified alignment tolerances provided by the manufacturer.
- Testing and operation: After installation, conduct a thorough functional test of the worm gear system. Verify that it operates smoothly, without unusual noise or vibration. Check for proper engagement of the gear teeth and ensure that the system performs as intended under different load conditions. Monitor the system’s performance during initial operation and address any issues or abnormalities promptly.
It’s important to follow the specific installation instructions provided by the gear system manufacturer. Different worm gear designs and applications may have additional installation requirements or considerations that should be taken into account.
Proper installation of a worm gear system ensures its reliable operation, minimizes wear, and maximizes its lifespan. If you are unsure about any aspect of the installation process, it is recommended to consult the manufacturer or seek the assistance of a qualified professional.
editor by CX 2023-09-28
