Varubeskrivning
CZPT precision CZPT ized plastic nylon spur equipment
Beskrivning:
Nylon PA6 Sheets & Rods that made the with 100% Virgin Raw Material by HangZhou Engineering Plastics Industries (Group) Company, has the best performance, such as: very tough, even at low temperatures, and high hardness in the surface, toughness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials.
Its widely used in a variety of mechanical structures and spare parts. Nylon PA6 products that made by HangZhou Engineering Plastics Industries (Team) Company, has the higher hardness, rigidity, a good resistance to wear and heat deflection temperature.
Positiva aspekter:
1. Good Tensile strength
two. High impact and notching impact strength
three. High heat deflection temperature
four. High strength and stiffness
5. Good glide and limp home characters
6. Good chemical stability against organic solvents and fuels
7. Resistant to thermal aging (applicable temperature between -50°C and 110°C
8. Size alternation by humidity absorption must be considered
Ansökan:
one. Nylon PA6 Products that made by HangZhou Engineering Plastics Industries (Team) Company is widely substituted for wear parts of mechanical equipment, or used as quick-wear parts of equipment instead of copper and alloy
2. Shaft sleeve, bearing bush, lining, lining plate, gear
3. Worm gear, roller copper guide rail, piston ring, seal ring, slide block
four. Spheric bowl, impeller, blade, cam, nut, valve plate,
five. Pipe, stuffing box, rack, belt pulley, pump rotor, etc.
Main Properties of Nylon
| Egendom | Item No. | Anordning | MC Nylon (All-natural) | Oil Nylon+Carbon (Black) | Oil Nylon (Eco-friendly) | MC901 (Blue) | MC Nylon+MSO2 (Light black) | |
| Mechanical Homes | en | Densitet | g/cm3 | 1.15 | 1.15 | 1.135 | 1.15 | 1.sixteen |
| 2 | Water absorption (23ºC in air) | % | one.8-2. | 1.8-2. | två | two.three | två.fyra | |
| 3 | Draghållfasthet | MPa | 89 | 75.three | 70 | åttioett | sjuttioåtta | |
| fyra | Tensile pressure at crack | % | 29 | 22.seven | 25 | 35 | tjugofem | |
| fem | Compressive tension(at 2%nominal strain) | MPa | femtioett | femtioett | fyrtiotre | fyrtiosju | fyrtio nio | |
| 6 | Charpy affect strength (unnotched) | KJ/m2 | No break | No split | ≥50 | No BK | No split | |
| 7 | Charpy effect energy (notched) | KJ/m2 | ≥5.seven | ≥6.4 | 4 | tre,5 | 3.5 | |
| 8 | Tensile modulus of elasticity | MPa | 3190 | 3130 | 3000 | 3200 | 3300 | |
| nio | Ball indentation hardness | N/mm2 | 164 | ett hundra och femtio | ett hundra fyrtiofem | 160 | ett hundra sextio | |
| 10 | Rockwell hardness | – | M88 | M87 | M82 | M85 | M84 | |
Worm gears are proper angle drives that provide big equipment ratios with reasonably brief heart-to-center distances from 1/4″ to eleven”. When appropriately set up and lubricated, they provide as the quietest, smoothest-operating gear variety. Because worm gear drives can achieve large equipment ratios, optimum reduction can be attained in a smaller sized space than numerous other kinds of equipment drives. The worm and worm equipment operate at a 90° angle on non-intersecting axes.
